Modules
	Mesh4All 2.4 GHz band board
	Mesh4All 2.4 GHz board.

	Mesh4All multi-band board
	Mesh4All multi-band board.

	MeshMe CC2538 +20dBm PA
	Mesh4All 2.4 GHz board + 20dBm PA.

	USB dongle CC2538 + CC2592
	2.4 GHz board + 20dBm PA

Detailed Description

What goes here?

All those boards supported by Mesh4all and not defined in RIOT-OS

Board requirements

The goal of this repo is not to list general purpose dev boards or a dev-kit, however the goal is to accommodate those boards with a specific purpose, such as:

Environmental monitoring and metering systems
Data communication
Data storage and distribution
Action/Reaction systems

Environmental monitoring

Systems collecting eviromental data such as gases, temperature, pressure, moisture, etc or metering systems designed to measure any kind of data such as distance, weight, volume, positioning, etc.

Data communications

Systems capable of transmitting and receiving data in any way, radio, wire, optical, etc. not defined in RIOT-OS

Data storage and distribution

Data storage systems and those intended for their distribution in any way, synchronously or asynchronously.

Action/Reaction systems

Systems with a certain degree of autonomy, capable of collecting data and reacting based on that data, in loop or loop with bypass option.

Riotboot DFU bootloader

It's a bootloader that adds USB device firmware upgrade (DFU) support:

Go to RIOT/bootloaders/riotboot_dfu folder and use the command

make term flash

This sets USB port with VID =1209, PID = 7D02.

Compile firmware

Below are the steps to update the firmware:

Load the Bootloader firmware to the board

make install-boot

Compile and flash the bootloader with the following command

sudo make update

Every time that you run make update, you are uploading the firmware. Doesn matter if you're uploading by first time, the command install your firmware without errors

Note: : it's recommended run in sudo su or superuser with privileges to get access of the DFU device

Notes:

Tested with dfu-util v0.9
Find dfu-util info on http://dfu-util.sourceforge.net/

Modules